The DCP Medium Plus column pipe is a U-PVC column pipe made by Düzgünler Plastik for submersible pumps, rated for 15 bar safe pressure and a 150-meter pump head (Hm). It comes in eight sizes, from 42 mm (1¼") to 165 mm (6").
It is the lowest pressure class in the DCP series and a light column pipe for submersible pump use in irrigation and water wells within these limits.
Square thread: Both ends are male-threaded, so pipes go in and come out easily at any depth.
Coupler: Strengthens each joint and reduces loosening from vibration.
O-ring: Keeps sand and silt out of the thread and the joint leak-tight.
Short answer: if your pump head is below 150 meters, the DCP Medium Plus column pipe is enough; above that, pick a thicker-walled model. Values come from the official technical table.
|
Model |
Safe Pressure |
Pump Head (Hm) |
Safe Tensile Load (75 mm) |
|---|---|---|---|
|
DCP Medium Plus |
15 bar |
150 m |
2,450 kg |
|
DCP Standard Plus |
21 bar |
210 m |
3,200 kg |
|
DCP Heavy |
26 bar |
260 m |
4,040 kg |
|
DCP Super Heavy |
35 bar |
350 m |
5,195 kg |
Pro: Lightest model in the series; one 75 mm length weighs 4.37 kg.
Pro: Needs less labor to carry and install.
Con: Not for pump heads above 150 meters.
Con: For heavy pumps, Heavy or Super Heavy fits better.
Size depends on the pump's outlet and flow rate; confirm it with the pump maker's technical data.
Düzgünler Plastik was the first company in Türkiye to produce plastic column pipes for submersible pumps. Founded in 1975 by Ekrem Düzgün, it has made plastic pipes since 1996 and is run today by Ziya and Kemal Düzgün. Every DCP Medium Plus column pipe is tested in the company's own lab under ISO 9001.
It is rated for 15 bar safe hydrostatic pressure and a 150-meter pump head.
Eight sizes: 42, 48, 60, 75, 88, 113, 140 and 165 mm (1¼" to 6").
If your pump head is above 150 meters, choose Standard Plus, rated for 21 bar and 210 meters.
Yes, the square thread and coupler allow it. Check threads and O-rings before reinstalling.
Size, model, total length and adapter needs. Ask for an up-to-date quote.
The pipe that holds a submersible pump in the well and carries water to the surface.
U-PVC does not rust and is lighter, so it is easier to install.
Column pipe carries the pump; deep well pipe lines and protects the well bore.
|
Sources: DCP Medium Plus technical table · Wikipedia: Submersible pump For more information about our products and production processes, please contact us. |
For more information please contact us.
|
PIPE SERIES |
Outer Diameter | Nominal Diameter | Pipe End Wall Thickness (mm) | Pipe Center Wall Thickness (mm) | Pump Head (Hm) | Safe Hydrostatic Pressure* | Sleeve Diameter Above Tab | Safe Tensile Load | Breaking Load | Weight | |||
| mm | inch | mm | min | max | min | max | m | kg/cm² Bar-Atü | mm | kg | kg | kg/boy | |
|
MEDIUM PLUS 15 kgf/cm2 15 BAR |
42 | 1¼" | 32 | 3,90 | 4,30 | 2,30 | 2,70 | 150 | 15 | 59,50 | 870 | 1450 | 1,560 |
| 48 | 1½" | 40 | 4,20 | 4,60 | 2,60 | 2,80 | 150 | 15 | 64,50 | 1120 | 1860 | 1,985 | |
| 60 | 2" | 50 | 4,90 | 5,30 | 3,00 | 3,40 | 150 | 15 | 83,50 | 1600 | 2675 | 3,035 | |
| 75 | 2½" | 65 | 5,60 | 6,00 | 3,70 | 4,10 | 150 | 15 | 96 | 2450 | 4080 | 4,370 | |
| 88 | 3" | 80 | 6,10 | 6,50 | 4,20 | 4,60 | 150 | 15 | 111 | 3250 | 5410 | 5,800 | |
| 113 | 4" | 100 | 7,90 | 8,30 | 5,40 | 5,80 | 150 | 15 | 142 | 5310 | 8850 | 9,600 | |
| 140 | 5" | 125 | 9,70 | 10,10 | 7,20 | 7,60 | 150 | 15 | 170,90 | 8660 | 14440 | 15,170 | |
| 165 | 6" | 150 | 11,00 | 11,40 | 8,50 | 8,90 | 150 | 15 | 204,80 | 12000 | 20000 | 21,380 | |
![]() |
|
![]() |
![]() |
||||||||
| BOTTOM STAINLESS STEEL ADAPTER | TOP STAINLESS STEEL ADAPTER | BOTTOM GALVANIZED STEEL ADAPTER | TOP GALVANIZED STEEL ADAPTER | ||||||||
| DIAMETER | Stock | DIAMETER | Stock | DIAMETER | Stock | DIAMETER | Stock | ||||
| mm | inch | mm | inch | mm | inch | mm | inch | ||||
| 42 | 1¼" | Available | 42 | 1¼" | Available | 42 | 1¼" | Available | 42 | 1¼" | Available |
| 48 | 1½" | Available | 48 | 1½" | Available | 48 | 1½" | Available | 48 | 1½" | Available |
| 60 | 2" | Available | 60 | 2" | Available | 60 | 2" | Available | 60 | 2" | Available |
| 75 | 2½" | Available | 75 | 2½" | Available | 75 | 2½" | Available | 75 | 2½" | Available |
| 88 | 3" | Available | 88 | 3" | Available | 88 | 3" | Available | 88 | 3" | Available |
| 113 | 4" | Available | 113 | 4" | Available | 113 | 4" | Available | 113 | 4" | Available |
| 140 | 5" | Available | 140 | 5" | Available | 140 | 5" | Available | 140 | 5" | Available |
| 165 | 6" | Available | 165 | 6" | Available | 165 | 6" | Available | 165 | 6" | Available |
![]() |
|
![]() |
||||||
| TRAP | MANEUVERING HEAD | TIRE TIGHTENING WRENCH | ||||||
| Outer Diameter | CODE | Outer Diameter | CODE | Outer Diameter Range | CODE | |||
| mm | inch | mm | inch | mm | inch | |||
| 42 | 1¼" | DCP KP 042 | 42 | 1¼" | DCP MB 042 | 42-165 | 1¼" - 6 ¼" | PC SA 001 |
| 48 | 1½" | DCP KP 048 | 48 | 1½" | DCP MB 048 | |||
| 60 | 2" | DCP KP 060 | 60 | 2" | DCP MB 060 | |||
| 75 | 2½" | DCP KP 075 | 75 | 2½" | DCP MB 075 | |||
| 88 | 3" | DCP KP 088 | 88 | 3" | DCP MB 088 | |||
| 113 | 4" | DCP KP 113 | 113 | 4" | DCP MB 113 | |||
| 140 | 5" | DCP KP 140 | 140 | 5" | DCP MB 140 | |||
| 165 | 6" | DCP KP 165 | 165 | 6" | DCP MB 165 | |||