6 Atu latched sprinkler pipes are blue-striped polyethylene irrigation pipes made for 6 bar operating pressure, joined and taken apart with a latch lock. Düzgünler Plastik makes them in 8 sizes from Ø50 to Ø160, in 5 and 6 meter lengths.
They sit between 5 Atu and 8 Atu, for lines above 5 bar but not over 6 bar.
Short answer: 8 sizes, walls 1.80–6.15 mm, from the official product table, with 5 and 8 Atu for comparison.
|
Diameter |
5 Atu (mm) |
6 Atu (mm) |
8 Atu (mm) |
|---|---|---|---|
|
Ø50 |
1.50 |
1.80 |
2.40 |
|
Ø63 |
1.90 |
2.10 |
3.00 |
|
Ø75 |
2.25 |
2.50 |
3.60 |
|
Ø90 |
2.70 |
3.00 |
4.30 |
|
Ø110 |
3.55 |
4.10 |
5.30 |
|
Ø125 |
4.10 |
4.70 |
6.00 |
|
Ø140 |
4.65 |
5.40 |
6.70 |
|
Ø160 |
5.35 |
6.15 |
7.60 |
Short answer: up to 6 bar, 6 Atu is enough; above that, choose 8 Atu. Only the wall thickness differs.
Thicker than 5 Atu, so it suits lines just above 5 bar.
Lighter than 8 Atu at the same diameter.
Needs less material than 8 Atu on lines up to 6 bar.
Not for lines above 6 bar.
Slopes and long lines can raise pressure; then use 8 Atu.
Thinner than 8 Atu: at Ø90, 3.00 mm vs 4.30 mm.
Short answer: check pump output and the field's height difference:
Pump: Find the pressure the pump puts on the line.
Field: Find the lowest point; pressure rises downhill.
Choice: Between 5 and 6 bar, choose 6 Atu latched sprinkler pipes.
The latch joins and releases pipes without tools, so this quick coupling irrigation pipe moves from plot to plot during the season.
A 6 m length means fewer joints: a 60 m line needs 10 pipes of 6 m or 12 pipes of 5 m. A 5 m pipe is lighter to carry.
Düzgünler Plastik was founded in 1975 by Ekrem Düzgün as an agricultural machinery maker and has made plastic pipes since 1996. The company states that its 6 Atu latched sprinkler pipes, an HDPE irrigation pipe, are made to TS EN 12201-3 under the ISO 9001:2015 quality management system.
They are made for 6 bar operating pressure.
6 Atu has a thicker wall: at Ø110, 3.55 mm vs 4.10 mm.
3.00 mm.
They are made in 5 and 6 meter lengths.
Diameter, pressure class, length and quantity. Ask for a quote.
Nearly; 1 atmosphere is about 1.013 bar.
They are made to TS EN 12201-3.
Ø160, with a 6.15 mm wall.
|
Author: Düzgünler Plastik Technical Team — polyethylene irrigation pipe production and quality control specialists. About the company Sources: Latched Sprinkler Pipe product page · ISO 9001 For more information about our products and production processes, please contact us. |
For more information please contact us.
| PIPE DIAMETER | PN 5 THICKNESS | PN 6 THICKNESS | PN 8 THICKNESS | PN 10 THICKNESS |
| mm | mm | mm | mm | mm |
| Ø50 | 1,50 | 1,80 | 2,40 | 2,90 |
| Ø63 | 1,90 | 2,10 | 3,00 | 3,70 |
| Ø75 | 2,25 | 2,50 | 3,60 | 4,40 |
| Ø90 | 2,70 | 3,00 | 4,30 | 5,30 |
| Ø110 | 3,55 | 4,10 | 5,30 | 6,50 |
| Ø125 | 4,10 | 4,70 | 6,00 | 7,40 |
| Ø140 | 4,65 | 5,40 | 6,70 | 8,20 |
| Ø160 | 5,35 | 6,15 | 7,60 | 9,40 |